The shell mosaic Stones methods and precautions
1, Surface to be paved should be firm, clean and free of oil wax stains. Painted surfaces should be cleaned, and exposed to at least 80% of the original surface before paving.
2, To avoid scratching of the shell mosaic, shell mosaic should be away from friction from dust and the debris.
3, paving material is best to use tile adhesive powder clay or marble powder, sticky powder color should be white, the use of other miscellaneous color materials will affect the color of the shell mosaic.
4, the construction of the first white adhesive pulp painting walls, then 6 * 6 tooth scraper to scrape into uniform dentate, and then mortar to allow open time within the shell mosaic rubbing pressure in the can. Paving should pay attention to vertical. Individual shell mosaic crooked chapter-by-grain moving amendments before the mortar sets. 5, when approximately 24 hours after the tile adhesive solidification shells horse won the first prize caulk. The shell mosaic seam can be used to their preferences color caulking to do to fill the gap. Caulk application of gray rubber knife to caulks fully into the gap can not be empty. Sealing work is completed immediately with a wet towel or sponge the mosaic surface clean.
6, the mosaic to be cut, you should use high-quality diamond glass cutter for cutting the glass surface.
7 drill holes in the shell mosaic, using a dedicated drilling, drilling need to add water cooling.
8, in order to maintain the luster of the shell mosaic, you can not use abrasive cleaners, wire brush and sandpaper for cleaning, household cleaning windows supplies can be cleaned.